Following The Leader - Quilt Pattern

I did it!  I designed a quilt, built it twice and wrote a pattern.
You might remember the above example from this post.  

Whew!

Writing a pattern is a ton of work!  

Please let me know if you find any errors.

Following the Leader

Finish size: 48 ¾” x 48 ¾”

the directions assume you have basic sewing skills.
all seams are 1/4".

Materials

·          - Maze - 1 charm pack - OR - (35) 5" squares

·          - Background - 3 yards - OR -  2 ½ yds and a matching solid charm pack

·          - Geese and Binding - 1 1/4 yd  

·          - Backing – 3 yards 

Cut and Prep

I always label my pieces when I’m cutting out a whole quilt.  Otherwise I’d never remember what I cut.  I use either bits of paper pinned to the top piece or blank labels.

Maze Charms - 
You only need 35 charms.  The rest are extras.


Background Fabric -

Cut (8) 4"x WOF strips – sub-cut these strips into:

·         (28) 4"x 2 1/2" - label as "A"

·        (1) 4"x7  1/2" - label as "B"

·         (2) 4"x 36" - label as "C"

·         (2) 4"x 42 1/2" - label as "D"

·         (25) 4" squares - label as "bkgd sq"

Cut (2) 2 3/4" x WOF strips – sub-cut into:

·         (28) 2 3/4" sq - label as "goose corners"

Cut (6) 2 1/2"x WOF strips - label as "border"

DO NOT DO this next step if you’re using a solid charm pack.

Cut (8) 5"x WOF strips – sub-cut into

·         (35) 5" squares - label as "charms"    

If you’re using a solid charm pack, you only need 35 charms.

Goose and Binding Fabric - 

Cut (1) 5" x WOF – sub-cut into

·         (7) 4 3/4" sq. - label as "geese"

Cut (1) 18"x WOF - label as "binding"

Binding

Whenever possible I make the binding first.  I'm so impatient for the quilt to be done that I don't want to stop and take the binding when it's time to use it.  I'd rather have it ready to go.

I made bias binding, using this tutorial I found thru Tracey.

I cut my strips at 2 ½”.

Feel free to use whatever method works for you.

Building the Geese Units

These units use:
(28) Goose Corners
(7) Geese
(28) "A" rectangles

I found this method of building flying geese units from sophie.   Follow the directions there, using the "geese" and "goose corners".  The squares we've cut are slightly larger than the math in the directions calls for.  I like having a bit of wiggle room to square them up when I'm done.

You should end up with 28 flying geese.

Now we turn them into squares. 

Sew an “A” piece to the bottom of the goose.

Make 18 of these.

I’m calling these Top Geese. (original, right?)

Sew an “A” piece to the tip of the goose.

Make 10 of these.
I’m calling these Bottom Geese. 

Square them all up to 4" and set aside.

Building the Maze Units

**These directions will not create the rainbow effect in my grey example, the maze will look more like the other example.**

I pressed my seams open, which eliminated a lot of bulk.  I also starched the crud out of them, so they stayed nice and square.  I made my own starch, using this recipe.

These go together quickly if you chain piece them. 

On the back of your maze charms draw a diagonal line, corner to corner.
This is a cutting line, so it won't be seen.
Just be sure to use a pen that doesn't bleed, I used a ball point pen.

Sew a maze charm and a solid charm together ¼” from the center line.

Run it thru the machine again, sewing a ¼” from the other side of the center line.

Cut on the center line.  Press.

You now have 70 Half Square Triangles.  Pull 12 of these.  Trim to 4”.  These are the "maze corners."  Set aside.

Pull 29 blocks.  On the back of each of these blocks, draw a diagonal line corner to corner, opposite the existing seam.

 

Pair up each marked block with an unmarked one.
Following the steps above, sew ¼” seam on both sides of the line.



Cut.  Press. Trim the blocks to 4".

Building the Borders

You can look at the layout drawing under "putting it all together", if these directions are confusing.

Inner Border:

For this step we need:

·         (1) Top Goose

·         (1) Bottom Goose

·         The “B” piece

·         (2)  “C” pieces

·         (2) “D” pieces

Sew the Bottom Goose to the left end of a “C” piece.  – This is your Top Border.

Sew the “B” piece to the tip of the Top Goose.  Sew the other “C” piece to the other end of the Top Goose. – This is your Left Border.

The Bottom and Right Borders are the “D” strips, no sewing required. 

Outer Border:

For this step we need:

·         (6) “border” strips.

Piece the strips together to create the lengths needed.  We need :

·         (2) 2 ½” x 46”

·         (2) 2 ½” x 50”

Putting it All Together

You should have:

·          58 maze blocks

12 maze corners
17 top geese
9 bottom geese
25 “bkgd sq”

Now the fun part.

Using the picture below, lay out your maze and geese.

When you're happy with the placement, snap a picture of the layout to use as a reference.

please ignore the itty-bitty numbers, they helped me make the rainbow effect.

Now, sew the blocks into rows.

Here's what I do, so I don’t get them mixed up as I sew the rows together.  

Stack the blocks in each row, with the left-most block on top.

Clip the stack together AT THE TOP.
The clips I use leave a nice impression on the top of the block, which helps me keep them oriented correctly.

Before you sew them together, place a pin in the upper left corner of the top block.

Now, sew the blocks into rows.  Press.

Lay out the rows again to double check placement.

Sew the rows together.

Adding the Borders

Inner Border:

Sew the Top Border on first, then clockwise on the next three.  These pieces are slightly longer than you need.  You can trim of the extra after you attach it to the center.

Outer Border:

Sew the top and bottom borders on, then add the sides.

Quilt, Bind and Enjoy.

whew!  my first pattern.  what do you think?